Cart 0

Motor/Stepper/Servo/Robot Shield for Arduino I2C v2 Kit w/ PWM Driver

$ 18.99
  • 2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter!
  • 4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes.
  • Runs motors on 4.5VDC to 13.5VDC.
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
  • Big terminal block connectors to easily hook up wires (18-26AWG) and power

 

Stackable Motor/Stepper/Servo/Robot Shield for Arduino. Drive up to 4 DC motors or 2 stepper motors. Stack up to 32 shields - that would drive up to 64 stepper motors or 128 DC motors!

This shield will make quick work of your next robotics project!

Specifications:

2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter!

4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.

Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.

Motors automatically are disabled on power-up.

Big terminal block connectors to easily hook up wires (18-26AWG)

power Arduino reset button  

Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies

Tested compatible with Arduino UNO, Leonardo, ADK/Mega R3, Due, Diecimila & Duemilanove.

Works with Mega/ADK R2 and earlier with 2 wire jumpers.

Download the easy-to-use Arduino software library, check out the examples and you're ready to go!



More from this collection